You need a good mobile network signal to be able to make calls and send messages or use data. Weak signal means dropped calls, sluggish internet speeds, or no service. While weak mobile network signals can be frustrating to deal with, there are multiple ways to improve the strength. In this article, we shall show you how to increase the strength of the mobile network signals.

Move to a Different Location

The simplest and best thing you can do to boost your mobile network signal is to just move to another place. Signal strength, at times, depends on your location.

Why does this happen?

• Building materials: Metal, concrete, or thick walls can impede signals.
• Interference: Your phone’s signal may be disrupted by other electronic devices.
• Distance from the tower: The farther away you are from a cell tower, the weaker the signal.

If you do not have strong reception, however, take note of the fact that you are not alone and try to escape to a higher floor, as close to the window or outside as you can.

Restart Your Phone

Her cell signal might be bad, and sometimes, restarting your phone might help. This reconnects your device to the nearest cell tower and can address minor problems.

How to restart your phone:

• On Android: Hold down the power button, and then you will see “Restart” as an option.
• On an iPhone: Press and hold the power button and either volume button until the slider appears, slide to turn it off, and turn it back on.

Rebooting your device helps build a new connection to your carrier’s network.

Toggle Between the 4G and 3G Networks

The mobile networks are ever-changing. Users facing weak signal strength can try switching between 4G (LTE) and 3G networks.

How to toggle between networks:

• On Android: Settings > Mobile networks > Preferred network type > Choose 4G/3G/2G or 3G only.
• On iPhone: Settings > Cellular > Cellular Data Options > Voice & Data, and toggle between LTE and 3G.

In areas where 4G is patchy, connecting to 3G can sometimes yield a more stable connection.

Turn on Airplane Mode and Turn It Off

Aeroplane Mode quick ways All wireless communications are temporarily suspended, such as mobile network communications. (After a few seconds of aeroplane mode, you can turn it off again: your phone may reconnect to a nearby tower, giving you a stronger signal.)

How to turn Aeroplane Mode on and off:

• On Android: Pull down from the top of the screen, then tap the aeroplane icon.
• On iPhone: Swipe up (or swipe down if you have a newer model) and tap the aeroplane icon.

An easy trick to help reset your connection and get better signal strength.

Use Wi-Fi Calling.

This is a great alternative if you have a weak mobile network signal and a strong Wi-Fi connection. Wi-Fi calling allows you to make calls and send texts using a Wi-Fi network rather than a cellular connection.

How to enable Wi-Fi calling:

• On Android: Tap Settings > Connections > Wi-Fi Calling and enable it.
• On iPhone: Settings > Phone > Wi-Fi Calling, then toggle it on.

Wi-Fi calling allows you to stay connected even when your mobile network signal is weak.

Enable VoLTE (Voice over LTE).

VoLTE uses your 4G LTE connection for voice calls, which results in better call quality and strength. So, if you are facing weaker mobile signal strength, turning on the VoLTE setting will help you with the call quality and improve your data speed.

How to enable VoLTE:

• ANDROID: Tap Settings > Mobile Networks > Advanced, then switch VoLTE on.
• On iPhone: Open Settings and tap Cellular, tap Cellular Data Options, and tap Voice & Data under LTE.

Enabling the service can keep your signal stable in areas with poor reception.

Update Your Phone’s Software

Also sometimes, weak signal strength has to do with outdated software. Frequent updates from phone manufacturers, including some for connectivity bugs, enhance network performance.

How to check for updates:

• On Android: Settings > System > Software Update.
• On iPhone: Settings > General > Software Update.

Updating your phone’s software makes sure you’re taking advantage of the latest fixes and upgrades pertaining to your network signal.

Use a Signal Booster

A signal booster amplifies weak cellular signals. It works by receiving the frail signal away from your home or office, amplifying it, and transmitting the stronger signal within.

How to install a signal booster:

• So, when you buy a signal booster, make sure that the one you pick is compatible with your carrier’s frequency bands.
• Install an outdoor antenna in the area receiving better signals.
• Position the indoor antenna in the area that you want to amplify the signal, like in front of your desk or in the living room.
• Before switching on the booster, connect it to your antennas.

Signal boosters are most effective in areas with persistently low cellular signals.

Change Your SIM Card

A problematic SIM card also can have weak signal strength. If so, you can get a new SIM card issued to you and get it replaced.

How to change your SIM card:

• Get in touch with your carrier and ask for a new SIM card.
• Put the new SIM card in your phone.
• Reboot your phone to create a new connection to the network.

Replacing your SIM card often resolves signal-related problems that occur due to a defective or obsolete card.

Keep Your Phone’s Antenna Clear

Your phone uses an internal antenna to communicate with the cellular network. Obstructions A high-end device may seem to have incredible coverage, but the antenna will be at the mercy of your hand or the phone case.

How to clear your antenna:

• Don’t grip your phone in a way that obstructs the antenna.
• “The antenna must be clear of any material; use non-metal cases.
• Take off any thick protective cases when you want a stronger signal.

Keeping the antenna of your phone unobstructed makes sure it receives signals more effectively from the tower.

Switch to a Different Carrier

Switching carriers can help out the signal if your current mobile carrier doesn’t cover your area. Carriers operate different bands, so some may work better in certain places than others.

How to check carrier coverage:

• Maps of research coverage in your area from different carriers
• Ask friends and family who use other carriers how their signal strength in your area compares.
• Some carriers offer prepaid plans or temporary service to test coverage.

If you switch to a carrier with coverage better suited for you, your signal strength should improve.

Contact Your Carrier for Help

If you have gone through all these steps and still have issues with weak mobile signals, you should contact your carrier. They might offer to troubleshoot and help you get that connection right, or make your network connection better, or solutions like a signal booster.

How to contact your carrier:

• Contact your carrier’s customer service line.
• They have online chat support.
• Go to a nearby store for face-to-face help.

You could also see if your carrier can assist you with any persistent network problems in your area.

Use a Mobile Network Extender

Mobile network extender is essentially a small device that connects to your broadband internet and amplifies your carrier’s signal. This is particularly useful in areas with poor coverage networks, including basements and rural areas.

How to configure a mobile network extender:

• Buy one from your carrier: a network extender.
• Connect the extender to your broadband internet using an Ethernet cable.
• In a weak area for mobile signals, place the extender.

In the absence of a signal, a mobile network extender will maintain a robust, consistent signal in an area lacking network coverage.

Conclusion

Strengthening your mobile network signal doesn’t mean you need to jump through hoops. Improving your connection can be done by following some of the steps above: Get into a better location, restart your phone, and use Wi-Fi calling. More advanced solutions (like using a signal booster, upgrading your SIM card, or a new carrier) can also work wonders. Try these tips and see which approach works best for you and your specific situation. With some simple adjustments, you’ll have a more stable and quicker mobile connection.